logo

Harmonized System Codes • Schedule B • Harmonized Commodity Description

Searched for: hot-rolled

Stainless steel, width 300m+ but less th/600mm, hot-rolled flat-rolled products, w/thickness of less than 4.75 mm
Stainless steel, width less th/300mm, hot-rolled flat-rolled products, w/thickness of less than 4.75 mm
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/patterns in relief, in coils, pickled, not clad/plated/coated
Iron/nonalloy steel,width 600mm+,hot-rolled flat-rolled product,in coil,w/pattern in relief,w/thick 4.75mm+,not pickld,not clad/plated/coatd
Iron/nonalloy steel,width 600mm+,hot-rolled flat-rolled product,in coil,w/pattern in relief,w/thick <4.75mm,not pickld,not clad/plated/coatd
Nonalloy hi-strength steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm+, pickled, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.7mm or more, pickled, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 3mm or mor but less 4.75mm, pickled, not clad/plated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick less than 3mm, pickled, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick o/10mm, not pickled/clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm or more & n/o 10mm, not pickled/clad/plated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 3mm or more & less 4.75mm, not pickld/clad/plated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick less than 3mm, not pickled/clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/pattern in relief,not coils,w/thick 4.75 or more, n/clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/pattern in relief,not coils,w/thick < 4.75mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, nesoi, not in coils, w/thick o/10mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick 4.75mm+ but n/o 10mm, not clad/plated/
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick 3mm+ but < 4.75mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick less than 3mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, nesoi, not clad/plated/coated
Iron/nonalloy steel, width less th/600mm, hot-rolled flat-rolled universal mill plate, not clad/plated/coated
Iron/nonalloy steel, width less th/600mm, hot-rolled flat-rolled products, nesoi, w/thick of 4.75mm or more, not clad/plated/coated
Nonalloy hi-strength steel, width less th/300mm, hot-rolled flat-rolled products, not clad/plated/coated
Iron/nonalloy steel, neosi, width less th/300mm, hot-rolled flat-rolled products, w/thick o/1.25 mm but n/o 4.75 mm, n/clad/plated/coated
Iron/nonalloy steel, neosi, width less th/300mm, hot-rolled flat-rolled products, w/thick 1.25mm or less, not clad/plated/coated
Nonalloy hi-strength steel, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, not clad/plated/coated
Iron/nonalloy steel, neosi, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, pickled, not clad/plated/coated
Iron/nonalloy steel, neosi, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, not pickled, not clad/plated/coated
Iron/nonalloy, concrete reinforcing bars and rods in irregularly wound coils, hot-rolled
Free-cutting steel, bars and rods in irregularly wound coils, hot-rolled
Iron/nonalloy steel, nesoi, hot-rolled bars & rods in irregularly wound coils, w/cir. x-sect. diam. <14mm, n/tempered/treated/partly mfd
Iron/nonalloy steel, nesoi, hot-rolled bars & rods in irregularly wound coils, w/cir. x-sect. diam. <14mm, w/0.6%+ of carbon, nesoi
Iron/nonalloy steel, nesoi, hot-rolled bars & rods in irregularly wound coils, w/cir. x-sect. diam. <14mm, w/less th/0.6% carbon, nesoi
Iron/nonalloy steel, nesoi, hot-rolled bars & rods, w/cir. x-sect. diam 14+mm or non-circ. x-sect., in irregularly wound coils, nesoi
Iron/nonalloy steel, concrete reinforcing bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, n/coils
Free-cutting steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, n/coils, nesoi
Iron/nonalloy steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, w/rectangular (o/than square) X-section
Iron/nonalloy steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, w/non-rectangular X-sect, not in coils
Iron/nonalloy steel, U,I or H-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height under 80 mm
Iron/nonalloy steel, L-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height under 80 mm
Iron/nonalloy steel, T-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height under 80 mm
Iron/nonalloy steel, U-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height of 80 mm or more
Iron/nonalloy steel, I-sections (standard beams), not further worked than hot-rolled, hot-drawn or extruded, w/height 80 mm or more
Iron/nonalloy steel, H-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height 80 mm or more
Iron/nonalloy steel, L or T-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height 80 mm or more
Iron/nonalloy steel, angles, shapes & sections nesoi, not further worked than hot-rolled, hot-drawn or extruded
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thickness o/10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. 4.75 mm or more but n/o 10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. 3 mm or more but less than 4.75 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thickness less than 3 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thickness o/10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thick. 4.75 mm or more but n/o 10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thick. 3 mm or more but less than 4.75 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thickness less than 3 mm
Stainless steel, width less th/600mm, hot-rolled flat-rolled products, w/thickness of 4.75 mm or more
Stainless steel, bars and rods in irregularly wound coils, hot-rolled
Stainless steel, bars and rods, hot-rolled, hot-drawn or extruded, of circular cross-section
Stainless steel, bars and rods, hot-rolled, hot-drawn or extruded, other than of circular cross-section
Stainless steel, angles, shapes & sections, hot-rolled, not drilled/punched or otherwise advanced
Stainless steel, angles, shapes & sections, other than hot-rolled and not drilled/punched or otherwise advanced
Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. of 4.75 mm or more
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm+
Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. of less than 4.75 mm
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., in coils, w/thick less 4.75mm
Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick. of 4.75 mm or more
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick 4.75mm+
Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick. of less than 4.75 mm
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., n/coils, w/thick less 4.75mm
Alloy chipper knife tool steel (o/than hi-speed), width less th/600mm, hot-rolled flat-rolled products
Alloy tool steel (o/than hi-speed/chipper knife), width 300mm+ but less th/600mm, hot-rolled flat-rolled products
Alloy tool steel (o/than hi-speed/chipper knife), width less th/300mm, hot-rolled flat-rolled products
Alloy steel (o/than silicon elect./tool), width less th/600mm, hot-rolled flat-rolled products, w/thickness of 4.75 mm or more
Alloy steel (o/than silicon elect./tool), width 300mm+ but less th/600mm, hot-rolled flat-rolled products, w/thickness less than 4.75 mm
Alloy steel (o/than silicon elect./tool), width less th/300mm, hot-rolled flat-rolled products, w/thickness less than 4.75 mm
Alloy silico-manganese steel, bars and rods in irregularly wound coils, hot-rolled
Alloy tool steel (o/than hi-speed), bars & rods in irregular wound coils, hot-rolled, n/tempered, treated or partly manufactured
Alloy tool steel (o/than hi-speed), bars and rods in irregularly wound coils, hot-rolled, nesoi
Alloy steel (o/than hi-speed/silico-mang./tool) steel, bars and rods in irregularly wound coils, hot-rolled
Alloy high-speed steel, bars and rods, o/than hot-rolled and in irregularly wound coils
Alloy silico-manganese steel, bars and rods, not cold-formed, o/than hot-rolled and in irregularly wound coils
Alloy silico-manganese steel, bars and rods, cold formed, o/than hot-rolled and in irregularly wound coils
Alloy ball-bearing tool steel, bars and rods, not further worked than hot-rolled, hot-drawn or extruded
Alloy chipper knife tool steel, bars and rods, not cold-formed & not further worked than hot-rolled, hot-drawn or extruded
Alloy tool steel (o/than ball-bearing/chipper knife), bars and rods, not further worked than hot-rolled, hot-drawn or extruded
Alloy steel (o/than hi-speed, silico-mang./tool), bars and rods, not further worked than hot-rolled, hot-drawn or extruded
Alloy tool steel (o/than hi-speed), bars and rods, further worked than hot-rolled, forged, cold-formed or cold-finished
Alloy steel (o/than tool), bars and rods, further worked than hot-rolled, forged but not cold-formed
Alloy steel, angles, shapes and sections, hot-rolled & not drilled/not punched and not otherwise advanced
Alloy steel, angles, shapes and sections, o/than hot-rolled & not drilled/punced and not otherwise advanced