logo


Harmonized System Codes • Schedule B • Harmonized Commodity Description

Searched for: oils

Fats and oils derived from milk, other than butter or dairy spreads, not subject to gen note 15 and excess of quota in ch 4 add US note 14
Fats and oils derived from milk, other than butter or dairy spreads, subject to general note 15 (outside quota)
Fats and oils derived from milk, other than butter or dairy spreads, subject to quota pursuant to chapter 4 additional US note 14
Fish-liver oils and their fractions, other than cod-liver oil and its fractions
Fats and oils and their fractions, of fish other than cod and herring, excluding liver oil
Fats and oils and their fractions, of marine mammals
Animal fats and oils and their fractions nesi, whether or not refined, but not chemically modified
Nut oils, whether or not refined, not chemically modified
Fixed vegetable fats and oils and their fractions nesoi, whether or not refined, not chemically modified
Animal fats and oils, partly or wholly hydrogenated, interesterified, reesterified or elaidinized, not further prepared
Vegetable fats and oils nesi, partly or wholly hydrogenated, interesterified, reesterified or elaidinized, not further prepared
Animal or vegetable fats and oils, nesi, oxidized, dehydrated or otherwise chemically modified; inedible mixtures of fats and oils nesi
Oilcake and other solid residues, resulting from the extraction of vegetable fats or oils, of cotton seeds
Oilcake and other solid residues, resulting from the extraction of vegetable fats or oils, of linseed
Oilcake and other solid residues, resulting from the extraction of vegetable fats or oils, of sunflower seeds
Oilcake and other solid residues, resulting from the extraction of vegetable fats or oils, of low erucic acid rape or colza seeds
Oilcake and other solid residues, resulting from the extraction of vegetable fats/oils, of rape or colza seeds (other than low erucic acid)
Oilcake and other solid residues, resulting from the extraction of vegetable fats or oils, of coconut or copra
Oilcake and other solid residues, resulting from the extraction of vegetable fats or oils, of palm nuts or kernels
Oilcake and other solid residues, resulting from the extraction of vegetable fats or oils, nesi
Waste mixtures of hydrocarbons from petro oils & bitum. min. or preps.70%+ by wt. fr. petro oils, nesoi, n/o 50% any single hydrocarbon
Waste petroleum oils & oils from bitum. min. or preps nesoi 70%+ by wt. from petro. oils or bitum. min., nesoi
Residues (except petroleum coke or petroleum bitumen) of petroleum oils or of oils obtained from bituminous materials
Creosote oils, from dist.of hi-temp coal tar or wt. of aromatic exceeds nonaromatic
Petroleum oils and oils from bituminous minerals, crude, testing under 25 degrees A.P.I.
Petroleum oils and oils from bituminous minerals, crude, testing 25 degrees A.P.I. or more
Light oil motor fuel from petroleum oils and bituminous minerals (o/than crude) or preps. 70%+ by wt. from petroleum oils
Light oil motor fuel blending stock from petroleum oils & bituminous minerals (o/than crude) or prep 70%+ by wt. from petroleum oils
Waste oils from petro oils/bitum minerals/preps 70%+ by wt. fr. petro oils/bitum minerals containing PCBs, PCTs or PBBs
Waste motor fuel or motor fuel blending stock from petro oils and bitumin. minerals (o/than crude) or preps. 70%+ by wt. from petro oils
Naphthas (exc. motor fuel/mtr fuel blend. stock) fr petroleum oils & bitumin minerals (o/than crude) or preps 70%+ by wt. fr petroleum oils
Light oil mixt. of hydrocarbons fr petro oils & bitum min(o/than crude) or prep 70%+ wt. fr petro oils, nesoi,n/o 50% any single hydrocarbon
Light oils and preparations from petroleum oils & oils from bituminous min. or preps 70%+ by wt. from petro. oils or bitum. min., nesoi
Distillate and residual fuel oil (including blends) derived from petroleum or oils from bituminous minerals, testing under 25 degrees A.P.I.
Distillate and residual fuel oil (including blends) derived from petroleum oils or oil of bituminous minerals, testing 25 degree A.P.I. or >
Kerosene-type jet fuel from petroleum oils and oils of bitumin minerals (o/than crude) or preps. 70%+ by wt. from petroleum oils
Kerosene motor fuel (not jet) from petro oils and bitumin minerals (o/than crude) or preps. 70%+ by wt. from petroleum oils
kerosene motor fuel blending stock (not jet), from petro oils and bitumin. minerals (o/than crude) or preps. 70%+ by wt. from petro oils
Kerosene (ex. motor fuel/mtr fuel blend stock/jet), fr petro oils and bitumin. minerals (o/than crude) or preps. 70%+ by wt. fr petro oils
Lubricating oils, w/or w/o additives, fr. petro oils and bitumin minerals (o/than crude) or preps. 70%+ by wt. fr. petro oils
Lubricating greases from petro oil/bitum min/70%+ by wt. fr. petro. oils but n/o 10% by wt. of fatty acid salts animal/vegetable origin
Lubricating greases from petro oil/bitum min/70%+ by wt. fr. petro. oils but over 10% by wt. of fatty acid salts animal/vegetable origin
Mixture of hydrocarbons from petro oils & bitum. min. or preps.70%+ by wt. fr. petro. oils, nesoi, n/o 50% any single hydrocarbon
Petroleum oils & oils from bituminous minerals or preps nesoi 70%+ by wt. from petroleum oils or bitum. min., not waste, nesoi
Waste kerosene or naphthas from petro oils and bitumin minerals (o/than crude) or preps. 70%+ by wt. From petro oils/bitumin minerals
Waste lubricating oils, w/or w/o additives, from petro oils and bitumin minerals (o/than crude) or preps. 70%+ by wt. from petro oils
Waste lubricating greases from petro oil/bitum min/70%+ by wt. fr petro oils but n/o 10% by wt. of fatty acid salts animal/vegetable origin
Waste lubricating greases from petro oil/bitum min/70%+ by wt. fr petro oils but over 10% by wt. of fatty acid salts animal/vegetable origin
Preparations for the treatment of textile materials, containing 50 but not over 70 percent or more by weight of petroleum oils
Preparations for the treatment of textile materials, containing less than 50 percent by weight of petroleum oils
Preparations for the treatment of leather, furskins, other materials nesoi, containing less than 70% petroleum or bituminous mineral oils
Lubricating preparations containing 50% but less than 70% by weight of petroleum oils or of oils obtained from bituminous minerals
Lubricating preparations containing less than 50% by weight of petroleum oils or of oils from bituminous minerals
Stamping foils
Essential oils of orange
Essential oils of lemon
Essential oils of grapefruit
Essential oils, other, nesoi
Essential oils of peppermint (Mentha piperita)
Essential oils of mints, other than peppermint
Essential oils of eucalyptus
Essential oils of orris
Essential oils, other, nesoi
Concentrates of essential oils; terpenic by-product of the deterpenation of essential oils; aqueous distillates& solutions of essential oils
Gum, wood or sulfate turpentine oils
Terpenic oils, nesoi, produced by treatment of coniferous woods; crude dipentene; sulfite turpentine and other crude para-cymene
Resin acids, derivatives of resin acids and rosin, rosin spirit and rosin oils, run gums, nesoi
Wood tar and its oils; wood creosote; wood naphtha; vegetable pitch; preparations based on rosin, resin acids or vegetable pitch
Additives for lubricating oils containing petroleum oils or oils obtained from bituminous minerals
Additives for lubricating oils, nesoi
Prepared additives for mineral oils (incl. gasoline) or other liquids used for the same purposes as mineral oils, nesoi
Hydraulic brake fluids and transmission fluids cont. less than 70% by weight of petroleum oils, or bituminous mineral oils
Industrial monocarboxylic fatty acids or acid oils from refining derived from coconut, palm-kernel, or palm oil
Industrial monocarboxylic fatty acids or acid oils from refining, nesoi
Synthetic rubber and factice derived from oils, in latex form, in primary forms or in plates, sheets or strip, nesoi
Synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip, nesoi
Noils of wool or of fine animal hair
Waste, other than noils, of wool or of fine animal hair, including yarn waste but excluding garnetted stock
Coconut, abaca, ramie, other veg. fibers, nesoi, raw or processed, not spun; tow noils and their wastes (incl. yarn waste and garnetted stoc
Refined copper, plates, sheets and strip, not in coils, with a thickness o/0.15mm but less than 5 mm & a width of less than 500 mm
Copper-zinc base alloys (brass), plates, sheets and strip, in coils
Copper-zinc base alloys (brass), plates, sheets and strip, not in coils
Copper-tin base alloys (bronze), plates, sheets and strip, in coils. with a thickness of 5 mm or more
Copper-tin base alloys (bronze), plates, sheets and strip, in coils, with a thickness o/0.15mm but less than 5mm & a width of 500mm or more
Copper-tin base alloys (bronze), plates, sheets and strip, in coils, w/thickness o/0.15mm but less than 5mm & a width of less than 500mm
Refined copper, plates, sheets and strip, in coils, with a thickness of 5 mm or more
Refined copper, plates, sheets and strip, in coils, with a thickness over 0.15mm but less than 5 mm
Refined copper, plates, sheets and strip, not in coils, with a thickness of 5 mm or more
Refined copper, plates, sheets and strip, not in coils, with a thickness o/0.15mm but less than 5 mm & a width of 500 mm or more
Aluminum (o/than alloy), unwrought, in coils, w/uniform x-section throughout length & w/least cross-sectional dimension n/o 9.5 mm
Aluminum alloys, unwrought, in coils, w/uniform x-section throughout length & w/least cross-sectional dimension n/o 9.5 mm
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/patterns in relief, in coils, pickled, not clad/plated/coated
Nonalloy hi-strength steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm+, pickled, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.7mm or more, pickled, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 3mm or mor but less 4.75mm, pickled, not clad/plated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick less than 3mm, pickled, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick o/10mm, not pickled/clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm or more & n/o 10mm, not pickled/clad/plated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 3mm or more & less 4.75mm, not pickld/clad/plated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick less than 3mm, not pickled/clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/pattern in relief,not coils,w/thick 4.75 or more, n/clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/pattern in relief,not coils,w/thick < 4.75mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, nesoi, not in coils, w/thick o/10mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick 4.75mm+ but n/o 10mm, not clad/plated/
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick 3mm+ but < 4.75mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick less than 3mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 3mm+, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick o/1mm but less than 3mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 0.5mm or more but n/o 1mm, not clad/plated/coated
Nonalloy hi-strength steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick less than 0.5mm, not clad/plated/coated
Nonalloy steel(blackplate), width 600mm+, cold-rolled flat-rolled products, in coils, w/thick less than 0.361mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 0.361mm+ but less 5mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick 3mm or more, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick o/1mm but less than 3mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick 0.5mm+ but n/o 1mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick less than 0.5mm, not clad/plated/coated
Iron/nonalloy, concrete reinforcing bars and rods in irregularly wound coils, hot-rolled
Free-cutting steel, bars and rods in irregularly wound coils, hot-rolled
Iron/nonalloy steel, nesoi, hot-rolled bars & rods in irregularly wound coils, w/cir. x-sect. diam. <14mm, n/tempered/treated/partly mfd
Iron/nonalloy steel, nesoi, hot-rolled bars & rods in irregularly wound coils, w/cir. x-sect. diam. <14mm, w/0.6%+ of carbon, nesoi
Iron/nonalloy steel, nesoi, hot-rolled bars & rods in irregularly wound coils, w/cir. x-sect. diam. <14mm, w/less th/0.6% carbon, nesoi
Iron/nonalloy steel, nesoi, hot-rolled bars & rods, w/cir. x-sect. diam 14+mm or non-circ. x-sect., in irregularly wound coils, nesoi
Iron/nonalloy steel, forged bars and rods, not in coils
Iron/nonalloy steel, concrete reinforcing bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, n/coils
Free-cutting steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, n/coils, nesoi
Iron/nonalloy steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, w/non-rectangular X-sect, not in coils
Free-cutting steel, bars and rods, not further worked than cold-formed or cold-finished, not in coils
Iron/nonalloy steel nesoi, bars and rods, not further wkd. than cold-formed or cold-finished, not in coils
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thickness o/10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. 4.75 mm or more but n/o 10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. 3 mm or more but less than 4.75 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thickness less than 3 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thickness o/10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thick. 4.75 mm or more but n/o 10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thick. 3 mm or more but less than 4.75 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thickness less than 3 mm
Stainless steel, bars and rods in irregularly wound coils, hot-rolled
Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. of 4.75 mm or more
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm+
Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. of less than 4.75 mm
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., in coils, w/thick less 4.75mm
Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick. of 4.75 mm or more
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick 4.75mm+
Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick. of less than 4.75 mm
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., n/coils, w/thick less 4.75mm
Alloy high-speed steel, bars and rods in irregularly wound coils, hmot-rolled
Alloy silico-manganese steel, bars and rods in irregularly wound coils, hot-rolled
Alloy tool steel (o/than hi-speed), bars & rods in irregular wound coils, hot-rolled, n/tempered, treated or partly manufactured
Alloy tool steel (o/than hi-speed), bars and rods in irregularly wound coils, hot-rolled, nesoi
Alloy steel (o/than hi-speed/silico-mang./tool) steel, bars and rods in irregularly wound coils, hot-rolled
Alloy high-speed steel, bars and rods, o/than hot-rolled and in irregularly wound coils
Alloy silico-manganese steel, bars and rods, not cold-formed, o/than hot-rolled and in irregularly wound coils
Alloy silico-manganese steel, bars and rods, cold formed, o/than hot-rolled and in irregularly wound coils
Waste (including noils, yarn waste and garnetted stock) of synthetic fibers
Waste (including noils, yarn waste and garnetted stock) of artificial fibers
Machinery for the extraction or preparation of animal or fixed vegetable fats or oils, nesi
Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features and other parts nesi
Deflection coils for cathode-ray tubes
Parts of cathode-ray tubes other than deflection coils or front panel assemblies
Distributors and ignition coils
Noils of camel hair (in subheading 5103.10.00)
We use cookies and 3rd party services to recognize visitors, target ads and analyze site traffic.
By using this site you agree to this Privacy Policy. Learn how to clear cookies here