logo


Harmonized System Codes • Schedule B • Harmonized Commodity Description

Searched for: steel

Granulated slag (slag sand) from the manufacture of iron or steel
Slag, dross and other waste (except ferrous scale) from the manufacture of iron or steel
Zinc dross and skimmings (not from from the mfr. of iron or steel)
Ash and residues (not from the mfr. of iron or steel), containing mainly zinc, other than hard zinc spelter/zinc dross & skimmings
Ash and residues (other than from the manufacture of iron or steel), containing mainly lead, nesoi
Ash and residues (not from the mfr. of iron or steel), containing mainly copper
Ash and residues (not from the mfr. of iron or steel), containing mainly aluminum
Ash and residues (other than from the manufacture of iron or steel), containing antimony, beryllium, cadmium, chromium or their mixtures
Ash and residues (other than from the manufacture of iron or steel), containing mainly vanadium
Ash and residues (other than from the manufacture of iron or steel), containing mainly tungsten
Slag (other than from the manufacture of iron or steel) contains over 40% titanium & if has over 2% Cu/Pb/Zn is not for recovery thereof
Residues (not from mfr. of iron or steel) cont. metals/metal compounds nesoi, and n/adv. in value or cond. & if > 2% Cu/Pb/Zn n/for recovery
Other ash and residues (other than from the manufacture of iron or steel), containing metals or metal compounds, nesoi
Iron or steel, spring washers and other lock washers
Iron or steel, washers (o/than spring washers and other lock washers)
Iron or steel, rivets
Iron or steel, cotters and cotter pins
Iron or steel, nonthreaded articles similar to rivets, cotters, cotter pins, washers and spring washers
Iron or steel, safety pins
Iron or steel, dressmakers' or common pins
Iron or steel, pins (o/than safety pins, dressmakers' or common pins)
Iron or steel, sewing, darning or embroidery needles
Iron or steel, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles for use in the hand
Iron or steel, leaf springs & leaves therefore, to be used in motor vehicles having a G.V.W. not exceeding 4 metric tons
Iron or steel, leaf springs & leaves therefore, suitable for motor vehicle suspension (o/than for motor vehicles w/a G.V.W. o/4 metric tons)
Iron or steel, leaf springs & leaves therefore, not suitable for motor vehicle suspension
Iron or steel, springs (o/than leaf springs, helical springs or hairsprings)
Iron or steel, portable non-electric domestic cooking appliances and plate warmers, for gas fuel or for both gas and other fuels
Iron or steel, nonportable non-electric domestic stoves or ranges, for gas fuel or for both gas and other fuels
Iron or steel, nonportable non-electric domestic cook. appl. (o/th stoves or ranges) & plate warmers, for gas fuel or both gas & other fuels
Iron or steel, non-electric domestic cooking appliances and plate warmers, for liquid fuels
Iron or steel, non-electric domestic cooking appliances and plate warmers, o/than for gas or liquid fuels
Iron or steel, portable non-electric domestic grates & warming appl. (o/cooking/plate warmers), for gas fuel or both gas and other fuels
Iron or steel, nonportable non-electric domestic grates & warming appl. (o/than cooking/plate warmers), for gas fuel/both gas & other fuels
Iron or steel, portable non-electric domestic grates & warming appliances (o/than cooking/plate warmers) for liquid fuels
Iron or steel, nonportable non-electric domestic grates & warming appliances (o/than cooking/plate warmers), for liquid fuels
Iron or steel, non-electric domestic grates & warming appliances (o/than cooking/plate warmers), o/than for gas or liquid fuelss
Iron/steel, cooking chambers for nonportable non-electric domestic stoves or ranges, for gas or for gas and other fuels
Iron/steel, top surface panels w/ or w/o burners/controls for nonportable non-elect. domest. stoves or ranges, for gas or gas & other fuels
Iron/steel, door assmbly w/more than one of inner panel, out. panel, window, insul., for non-elect. stoves or ranges, for gas or gas & other
Iron/steel, parts of nonportable non-electric domestic stoves or ranges, nesoi, for gas fuel or for both gas and other fuels
Iron/steel, parts, of nonelectric domestic cooking and warming appliances, nesoi
Iron (o/than cast) or steel, non-electrically heated radiators and parts thereof, for central heating
Iron or steel, non-electrically heated air heaters and hot air distributors w/motor driven fan or blower and parts thereof
Iron or steel wool; iron or steel pot scourers and scouring or polishing pads, gloves and the like
Stainless steel, table, kitchen or o/household arts. amd parts thereof
Iron (o/than cast) or steel (o/than stainless), table, kitchen or o/household arts. and parts thereof, enameled
Iron (o/th cast) or steel (o/th stainless), table, kitchen or o/household arts. & parts thereof, not enameled but plated/coat. w/silver
Iron (o/th cast)/steel (o/th stainless), table/kitchen /household arts. & parts thereof, not enameled but plated/coat. w/prec metal o/silver
Iron (o/th cast) or steel (o/than tinplate or stainless), cookingware, not coated or plated with precious metal
Iron (o/th cast)/steel (o/th tinplate or stainless), table, kitchen (o/th cooking.) or o/household arts & part, n/coated/plated w/prec.metal
Stainless steel, sinks and wash basins
Iron (o/than cast) or steel, baths (whether or not enameled)
Iron or steel, sanitary ware (o/than baths or stainless steel sinks and wash basins) and parts thereof
Iron or steel, cast grinding balls and similar articles for mills
Steel, cast articles nesoi
Iron or steel, forged or stamped grinding balls and similar articles for mills
Iron or steel, articles forged or stamped but n/further worked, nesoi
Iron or steel, articles of wire, nesoi
Iron or steel, cable or inner wire for caliper and cantilever brakes and casing therefore, whether or not cut to length
Iron or steel, containers of a kind normally carried on the person, in the pocket or in the handbag, nesoi
Iron or steel, horse and mule shoes
Iron or steel, articles nesoi, coated or plated with precious metal
Iron or steel, articles, nesoi
Copper or iron/steel w/heads of copper, nails and tacks, drawing pins, staples and similar articles
Stainless steel, width 300m+ but less th/600mm, hot-rolled flat-rolled products, w/thickness of less than 4.75 mm
Stainless steel, width less th/300mm, hot-rolled flat-rolled products, w/thickness of less than 4.75 mm
Stainless steel, width 300+ but less th/600mm, cold-rolled flat-rolled products
Stainless steel, width less th/300mm, cold-rolled flat-rolled products, w/thickness o/1.25 mm
Stainless steel, width less th/300mm, cold-rolled flat-rolled products, w/ thickness of 0.25 mm but n/o 1.25 mm
Aluminum, stranded wire, cables & the like w/steel core, not electrically insulated, not fitted with fittings & not made up into articles
Aluminum, stranded wire, cables & the like w/steel core, not electrically insulated, fitted with fittings or made up into articles
Aluminum, elect. conductors of stranded wire, cables & the like (o/than w/steel core), n/elect. insulated, n/fitted w/fittings or articles
Aluminum, stranded wire, cables, & the like (o/than elect. conduct or w/steel core), n/elect. insulated, n/fitted w/fittings or articles
Aluminum, stranded wire, cables and the like (o/than w/steel core), not electrically insulated, fitted w/fittings or made up into articles
Circular saw blades (including slitting or slotting saw blades), w/working part of steel
Circular saw blades (including slitting or slotting saw blades), with working part of o/than steel, & base metal parts thereof
Stainless steel waste and scrap
Alloy steel (o/than stainless) waste and scrap
Tinned iron or steel waste and scrap
Iron or steel remelting scrap ingots
Pig iron, spiegeleisen, and iron or steel granules
Alloy steel powders
Pig iron, spiegeleisen, and iron or steel (o/than alloy steel) powders
Iron and nonalloy steel ingots
Iron and nonalloy steel in primary forms (o/than ingots)
Iron or nonalloy steel semifinished products, w/less than 0.25% carbon, w/rect. cross sect.(incl. sq.), w/width less than twice thickness
Iron or nonalloy steel semifinished products, w/less than 0.25% carbon, w/rect. cross sect. (exclud. sq.), nesoi
Iron or nonalloy steel semifinished products, w/less than 0.25% carbon, o/than w/rect. cross section
Iron or nonalloy steel semifinished products, w/0.25% or more of carbon
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/patterns in relief, in coils, pickled, not clad/plated/coated
Iron/nonalloy steel,width 600mm+,hot-rolled flat-rolled product,in coil,w/pattern in relief,w/thick 4.75mm+,not pickld,not clad/plated/coatd
Iron/nonalloy steel,width 600mm+,hot-rolled flat-rolled product,in coil,w/pattern in relief,w/thick <4.75mm,not pickld,not clad/plated/coatd
Nonalloy hi-strength steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm+, pickled, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.7mm or more, pickled, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 3mm or mor but less 4.75mm, pickled, not clad/plated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick less than 3mm, pickled, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick o/10mm, not pickled/clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm or more & n/o 10mm, not pickled/clad/plated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 3mm or more & less 4.75mm, not pickld/clad/plated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick less than 3mm, not pickled/clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/pattern in relief,not coils,w/thick 4.75 or more, n/clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/pattern in relief,not coils,w/thick < 4.75mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, nesoi, not in coils, w/thick o/10mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick 4.75mm+ but n/o 10mm, not clad/plated/
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick 3mm+ but < 4.75mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick less than 3mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, nesoi, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 3mm+, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick o/1mm but less than 3mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 0.5mm or more but n/o 1mm, not clad/plated/coated
Nonalloy hi-strength steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick less than 0.5mm, not clad/plated/coated
Nonalloy steel(blackplate), width 600mm+, cold-rolled flat-rolled products, in coils, w/thick less than 0.361mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 0.361mm+ but less 5mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick 3mm or more, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick o/1mm but less than 3mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick 0.5mm+ but n/o 1mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick less than 0.5mm, not clad/plated/coated
Iron/nonalloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, not clad/plated/coated, nesoi
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with tin, w/thick. 0.5 mm or more
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with tin, less than 0.5 mm thick
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with lead, including terneplate
Iron/nonalloy steel, width 600mm+, flat-rolled products, electrolytically plated or coated with zinc
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with zinc (other than electrolytically), corrugated
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with zinc (other than electrolytically), not corrugated
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with chromium oxides or with chromium and chromium oxides
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with aluminum-zinc alloys
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with aluminum o/than aluminum-zinc alloy
Iron/nonalloy steel, width 600mm+, flat-rolled products, painted/varnished or coated w/plastic but not plated/coated or clad w/metal
Iron/nonalloy steel, width 600mm+, flat-rolled products, painted/varnished or coated w/plastic, nesoi
Iron/nonalloy steel, width 600mm+, flat-rolled products, clad
Iron/nonalloy steel, width 600mm+, flat-rolled products, electrolytically coated or plated with base metal, nesoi
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated, nesoi
Iron/nonalloy steel, width less th/600mm, hot-rolled flat-rolled universal mill plate, not clad/plated/coated
Iron/nonalloy steel, width less th/600mm, hot-rolled flat-rolled products, nesoi, w/thick of 4.75mm or more, not clad/plated/coated
Nonalloy hi-strength steel, width less th/300mm, hot-rolled flat-rolled products, not clad/plated/coated
Iron/nonalloy steel, neosi, width less th/300mm, hot-rolled flat-rolled products, w/thick o/1.25 mm but n/o 4.75 mm, n/clad/plated/coated
Iron/nonalloy steel, neosi, width less th/300mm, hot-rolled flat-rolled products, w/thick 1.25mm or less, not clad/plated/coated
Nonalloy hi-strength steel, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, not clad/plated/coated
Iron/nonalloy steel, neosi, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, pickled, not clad/plated/coated
Iron/nonalloy steel, neosi, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, not pickled, not clad/plated/coated
Nonalloy hi-strength steel, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick o/1.25mm, not clad/plated/coated
Iron/nonalloy steel, nesoi, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick o/1.25mm, not clad/plated/coated
Iron/nonalloy steel, nesoi, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick o/0.25mm n/o 1.25mm, not clad/plated
Iron/nonalloy steel, nesoi, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick n/o 0.25mm, not clad/plated/coated
Iron/nonalloy steel, nesoi, width 300mm+ but less th/600mm, cold-rolled flat-rolled, <0.25% carbon, not clad/plated/coated
Iron/nonalloy steel, width less th/300mm, cold-rolled flat-rolled, w/0.25% or more carbon,w/thick o/0.25mm, not clad/plated/coated
Iron/nonalloy steel, width less th/300mm, cold-rolled flat-rolled, w/0.25% or more carbon,w/thick 0.25mm or less, not clad/plated/coated
Carving and butcher steels, of iron or steel, with or without their handles
Iron or steel household handtools (o/than carving & butcher steels), and base metal parts thereof
Caulking guns of iron or steel, and base metal parts thereof
Iron or steel handtools (o/ than household, o/than caulking guns) nesoi, and base metal parts thereof
Iron/nonalloy steel, width 300mm+ but less th/600mm, cold-rolled flat-rolled, w/0.25% or more carbon, not clad/plated/coated
Iron/nonalloy steel, width less th/600mm, flat-rolled further worked than cold-rolled, not clad, plated or coated
Iron/nonalloy steel, width less th/600mm, flat-rolled products, plated or coated with tin
Iron/nonalloy steel, width less th/600mm, flat-rolled products, electrolytically plated or coated with zinc
Iron/nonalloy steel, width less th/300mm, flat-rolled products, plated/coated with zinc (other than electrolytically), w/thick o/0.25mm
Iron/nonalloy steel, width less th/300mm, flat-rolled products, plated/coated w/zinc (other than electrolytically), w/thick 0.25mm or less
Iron/nonalloy steel, width 300+ but less th/600mm, flat-rolled products, plated or coated with zinc (other than electrolytically)
Iron/nonalloy steel, width less th/300mm, flat-rolled products, painted, varnished or coated w/plastic
Iron/nonalloy steel, width 300+ but less th/600mm, flat-rolled products, painted, varnished or coated w/plastic
Iron/nonalloy steel, width less th/600mm, flat-rolled products, plated or coated nesoi
Iron/nonalloy steel, width less th/600mm, flat-rolled products, clad
Free-cutting steel, bars and rods in irregularly wound coils, hot-rolled
Iron/nonalloy steel, nesoi, hot-rolled bars & rods in irregularly wound coils, w/cir. x-sect. diam. <14mm, n/tempered/treated/partly mfd
Iron/nonalloy steel, nesoi, hot-rolled bars & rods in irregularly wound coils, w/cir. x-sect. diam. <14mm, w/0.6%+ of carbon, nesoi
Iron/nonalloy steel, nesoi, hot-rolled bars & rods in irregularly wound coils, w/cir. x-sect. diam. <14mm, w/less th/0.6% carbon, nesoi
Iron/nonalloy steel, nesoi, hot-rolled bars & rods, w/cir. x-sect. diam 14+mm or non-circ. x-sect., in irregularly wound coils, nesoi
Iron/nonalloy steel, forged bars and rods, not in coils
Iron/nonalloy steel, concrete reinforcing bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, n/coils
Free-cutting steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, n/coils, nesoi
Iron/nonalloy steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, w/rectangular (o/than square) X-section
Iron/nonalloy steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, w/non-rectangular X-sect, not in coils
Free-cutting steel, bars and rods, not further worked than cold-formed or cold-finished, not in coils
Iron/nonalloy steel nesoi, bars and rods, not further wkd. than cold-formed or cold-finished, not in coils
Iron/nonalloy steel, bars and rods, not cold-formed, plated or coated with metal
Iron/nonalloy steel, bars and rods, cold-formed, plated or coated with metal
Iron/nonalloy steel, bars and rods, further worked than cold-formed or cold-finished, nesoi
Iron/nonalloy steel, U,I or H-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height under 80 mm
Iron/nonalloy steel, L-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height under 80 mm
Iron/nonalloy steel, T-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height under 80 mm
Iron/nonalloy steel, U-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height of 80 mm or more
Iron/nonalloy steel, I-sections (standard beams), not further worked than hot-rolled, hot-drawn or extruded, w/height 80 mm or more
Iron/nonalloy steel, H-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height 80 mm or more
Iron/nonalloy steel, L or T-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height 80 mm or more
Iron/nonalloy steel, angles, shapes & sections nesoi, not further worked than hot-rolled, hot-drawn or extruded
Iron/nonalloy steel, angles, shapes & sections nesoi, not further worked than cold-formed or cold-finished, from flat-rolled products
Iron/nonalloy steel, angles, shapes & sections nesoi, not further worked than cold-formed or cold-finished, not from flat-rolled products
Iron/nonalloy steel, angle, shapes & sections nesoi,cold-formed/cold-finished from flat-rolled prod. & furth wkd th/cold-formed/cold-finish
Iron/nonalloy steel, angles, shapes & sections nesoi,further wkd. than cold-formed or cold-finished and not from flat-rolled products
Iron/nonalloy steel, flat wire, <0.25% carbon, not plated or coated, w/thick n/o 0.25 mm
Iron/nonalloy steel, flat wire, <0.25% carbon, not plated or coated, w/thick o/0.25mm but n/o 1.25 mm
Iron/nonalloy steel, flat wire, <0.25% carbon, not plated or coated, w/thick o/1.25 mm
Iron/nonalloy steel, round wire, <0.25% carbon, not plated or coated, w/diameter less than 1.5 mm
Iron/nonalloy steel, round wire, <0.25% carbon, not plated or coated, w/diameter of 1.5 mm or more
Iron/nonalloy steel, wire (other than flat or round), <0.25% carbon, not plated or coated
Iron/nonalloy steel, flat wire, w/0.25% or more carbon, not plated or coated
Iron/nonalloy steel, round wire, w/0.25% or more carbon, not plated or coated
Iron/nonalloy steel, wire (other than flat or round), w/0.25% or more of carbon, not plated or coated
Iron/nonalloy steel, flat wire, plated or coated with zinc
Iron/nonalloy steel, round wire, <0.25% carbon, plated or coated with zinc, w/diameter of 1.5 mm or more
Iron/nonalloy steel, round wire, w/0.25% or more carbon and/or <1.5mm diam, plated or coated with zinc
Iron/nonalloy steel, wire (other than flat or round), <0.25% carbon, plated or coated with zinc
Iron/nonalloy steel, wire (other than flat or round), w/0.25% or more of carbon, plated or coated with zinc
Iron/nonalloy steel, flat wire, plated or coated with base metal other than zinc
Iron/nonalloy steel, round wire, <0.25% carbon, plated or coated with base metal other than zinc, w/diam. of 1.5 mm or more
Iron/nonalloy steel, round wire, w/0.25% or more carbon and/or <1.5mm diam, plated or coated with base metal other than zinc
Iron/nonalloy steel, wire (other than flat or round), <0.25% carbon, plated or coated with base metal other than zinc
Iron/nonalloy steel, wire (other than flat or round), w/0.25% or more of carbon, plated or coated with base metal other than zinc
Iron/nonalloy steel, wire, coated with plastics
Iron/nonalloy steel, wire, plated or coated with materials other than base metals or plastics
Stainless steel, ingots and other primary forms
Stainless steel, semifinished products of rectangular (other than square) cross-section
Stainless steel, semifinished products, other than of rectangular (other than square) cross-section
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thickness o/10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. 4.75 mm or more but n/o 10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. 3 mm or more but less than 4.75 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thickness less than 3 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thickness o/10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thick. 4.75 mm or more but n/o 10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thick. 3 mm or more but less than 4.75 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thickness less than 3 mm
Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of 4.75 mm or more
Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of 3 mm or more but less than 4.75 mm
Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness o/1 mm but less than 3 mm
Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of 0.5 mm or more but n/o 1 mm
Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of less than 0.5 mm
Stainless steel, width 600mm+, flat-rolled products, nesoi, further worked than cold-rolled
Stainless steel, width less th/600mm, hot-rolled flat-rolled products, w/thickness of 4.75 mm or more
Stainless razor blade steel, width less th/300mm, cold-rolled flat-rolled, w/thickness n/o 0.25 mm
Stainless steel (o/than razor blade steel), width less th/300mm, cold-rolled flat-rolled products, w/thickness n/o 0.25 mm
Stainless steel, width less th/600mm, flat-rolled products further worked than cold-rolled
Stainless steel, bars and rods in irregularly wound coils, hot-rolled
Stainless steel, bars and rods, hot-rolled, hot-drawn or extruded, of circular cross-section
Stainless steel, bars and rods, hot-rolled, hot-drawn or extruded, other than of circular cross-section
Stainless steel, bars and rods, not further worked than cold-formed or cold-finished, nesoi
Stainless steel, bars and rods, further worked than cold-formed or cold-finished, nesoi
Stainless steel, angles, shapes & sections, hot-rolled, not drilled/punched or otherwise advanced
Stainless steel, angles, shapes & sections, other than hot-rolled and not drilled/punched or otherwise advanced
Stainless steel, round wire
Stainless steel, flat wire
Stainless steel, wire (other than round or flat wire)
Alloy (o/than stainless) steel, ingots and other primary forms
Alloy (o/than stainless) steel, semifinished products
Alloy silicon electrical steel (grain-oriented), width 600mm+, flat-rolled products
Alloy silicon electrical steel (other than grain-oriented), width 600mm+, flat-rolled products
Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. of 4.75 mm or more
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm+
Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. of less than 4.75 mm
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., in coils, w/thick less 4.75mm
Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick. of 4.75 mm or more
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick 4.75mm+
Alloy tool steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick. of less than 4.75 mm
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., n/coils, w/thick less 4.75mm
Alloy tool steel, width 600mm+, cold-rolled flat-rolled products
Alloy steel (o/ than tool), width 600mm+, cold-rolled flat-rolled products, w/thickness 4.75 mm or more
Alloy heat-resisting steel, width 600mm+, cold-rolled flat-rolled products, w/thickness less than 4.75 mm
Alloy steel (o/th heat-resisting), width 600mm+, cold-rolled flat-rolled products, w/thickness less than 4.75 mm
Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, electrolytically plated or coated with zinc
Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, plated or coated with zinc (o/than electrolytically)
Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, nesoi
Alloy silicon electrical steel (grain-oriented), width 300mm+ but less th/600mm, flat-rolled products
Alloy silicon electrical steel (grain-oriented), width less th/300mm, flat-rolled products
Alloy silicon electrical steel (o/than grain-oriented), width 300mm+ but less th/600mm, flat-rolled products
Alloy silicon electrical steel (o/than grain-oriented), width less th/300mm, flat-rolled products
Alloy high-speed steel, width less th/600mm, flat-rolled products of high-speed steel
Alloy chipper knife tool steel (o/than hi-speed), width less th/600mm, hot-rolled flat-rolled products
Alloy tool steel (o/than hi-speed/chipper knife), width 300mm+ but less th/600mm, hot-rolled flat-rolled products
Alloy tool steel (o/than hi-speed/chipper knife), width less th/300mm, hot-rolled flat-rolled products
Alloy steel (o/than silicon elect./tool), width less th/600mm, hot-rolled flat-rolled products, w/thickness of 4.75 mm or more
Table knives w/fixed blades, w/stain. steel handles w/Ni or ov 10% by wt. of Mn, w/overall length 25.9cm or less & val.
Table knives w/fixed blades, w/stain. steel handles cont. Ni or ov 10% by wt of Mn, nesoi
Table knives w/fixed blades, w/stain. steel handles, nesoi, not ov 25.9 cm in overall length & val less than 25 cents each
Table knives w/fixed blades, w/stain. steel handles, nesoi
Table knives w/fixed blades, w/handles other than of silver-plate, stainless steel, rubber or plastics
Base metal forks, w/stainless steel handles cont. Ni or o/10% by wt of Mn, w/overall length n/o 25.9cm, valued under 25cents ea
Base metal forks, w/stainless steel handles cont. Ni or o/10% by wt of Mn, nesoi
Base metal forks, w/stainless steel handles, nesoi, valued under 25 cents each
Base metal forks, w/stainless steel handles, nesoi, valued at 25 cents each or more
Alloy steel (o/than silicon elect./tool), width 300mm+ but less th/600mm, hot-rolled flat-rolled products, w/thickness less than 4.75 mm
Alloy steel (o/than silicon elect./tool), width less th/300mm, hot-rolled flat-rolled products, w/thickness less than 4.75 mm
Alloy tool steel (o/than hi-speed), width 300mm+ but less th/600mm, cold-rolled flat-rolled products
Alloy tool steel (o/than hi-speed), width less th/300mm, cold-rolled flat-rolled products
Alloy steel (o/than tool), width 300mm+ but less th/600mm, cold-rolled flat-rolled products
Alloy steel (o/than tool), width less th/300mm, cold-rolled flat-rolled products, w/thickness n/o 0.25 mm
Alloy steel (o/than tool), width less th/300mm, cold-rolled flat-rolled products, w/thickness o/0.25 mm
Alloy steel, width less than 600mm, flat-rolled products further worked than cold-rolled, nesoi
Alloy high-speed steel, bars and rods in irregularly wound coils, hmot-rolled
Alloy silico-manganese steel, bars and rods in irregularly wound coils, hot-rolled
Alloy tool steel (o/than hi-speed), bars & rods in irregular wound coils, hot-rolled, n/tempered, treated or partly manufactured
Alloy tool steel (o/than hi-speed), bars and rods in irregularly wound coils, hot-rolled, nesoi
Alloy steel (o/than hi-speed/silico-mang./tool) steel, bars and rods in irregularly wound coils, hot-rolled
Alloy high-speed steel, bars and rods, o/than hot-rolled and in irregularly wound coils
Alloy silico-manganese steel, bars and rods, not cold-formed, o/than hot-rolled and in irregularly wound coils
Alloy silico-manganese steel, bars and rods, cold formed, o/than hot-rolled and in irregularly wound coils
Alloy ball-bearing tool steel, bars and rods, not further worked than hot-rolled, hot-drawn or extruded
Alloy chipper knife tool steel, bars and rods, not cold-formed & not further worked than hot-rolled, hot-drawn or extruded
Alloy tool steel (o/than ball-bearing/chipper knife), bars and rods, not further worked than hot-rolled, hot-drawn or extruded
Alloy steel (o/than hi-speed, silico-mang./tool), bars and rods, not further worked than hot-rolled, hot-drawn or extruded
Alloy steel, bars and rods, not further worked than forged
Alloy tool steel (o/than hi-speed), bars and rods, not further worked than cold-formed or cold-finished
Alloy steel (o/than tool), bars and rods, not further worked than cold-formed or cold-finished
Alloy tool steel (o/than hi-speed), bars and rods, further worked than hot-rolled, forged, cold-formed or cold-finished
Alloy steel (o/than tool), bars and rods, further worked than hot-rolled, forged but not cold-formed
Alloy steel (o/than tool), bars and rods, cold-formed
Alloy steel, angles, shapes and sections, hot-rolled & not drilled/not punched and not otherwise advanced
Alloy steel, angles, shapes and sections, o/than hot-rolled & not drilled/punced and not otherwise advanced
Alloy steel hollow drill bars and rods
Alloy silico-manganese steel, wire
Alloy high-speed steel, wire
Alloy steel (o/than hi-speed/silico-mang.), flat wire
Alloy steel (o/than hi-speed/silico-mang.), round wire
Alloy steel (o/than hi-speed/silico-mang.), wire (o/than flat or round wire)
Iron or steel sheet piling, whether or not drilled, punched or made from assembled elements
Iron or nonalloy steel, angles, shapes and sections, welded
Alloy steel, angles, shapes and sections of alloy steel, welded
Iron or nonalloy steel, rails for railway or tramway tracks
Alloy steel, rails for railway or tramway tracks
Iron or steel, switch blades, crossing frogs, point rods and other crossing pieces, for jointing or fixing rails
Iron or steel, fish plates and sole plates for jointing or fixing rails
Sleepers (cross-ties) for railway or tramway track construction of iron or steel
Railway or tramway track construction material and other materials specialized for joing or fixing rails, of iron or steel, nesoi
Stainless steel, seamless line pipe used for oil or gas pipelines
Iron (o/than cast) or nonalloy steel, seamless line pipe used for oil and gas pipelines
Alloy (other than stainless) steel, seamless line pipe used for oil or gas pipelines
Stainless steel, seamless drill pipe, of a kind used in drilling for oil or gas
Iron (o/than cast) or nonalloy steel, seamless drill pipe, of a kind used in drilling for oil or gas
Alloy (other than stainless) steel, seamless drill pipe, of a kind used in drilling for oil or gas
Stainless steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas
Stainless steel, seamless casing pipe, not threaded or coupled, of a kind used in drilling for oil or gas
Stainless steel, seamless tubing, of a kind used in drilling for oil or gas
Iron (o/than cast) or nonalloy steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas
Iron (o/than cast) or nonalloy steel, seamless casing pipe, not threaded or coupled, of a kind used in drilling for oil or gas
Alloy (other than stainless) steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas
Alloy (other than stainless) steel, seamless casing pipe, not threaded or coupled, of a kind used in drilling for oil or gas
Alloy (other than stainless) steel, seamless tubing, of a kind used in drilling for oil or gas
Iron (o/than cast) or nonalloy steel, seamless, cold-drawn or cold-rolled, hollow bars w/circular cross section
Iron (o/than cast) or nonalloy steel, seamless, cold-drawn or cold-rolled, tubes, pipes & hollow profiles, w/circular cross section, nesoi
Iron (o/than cast) or nonalloy steel, seamless, not cold-drawn or cold-rolled, tubes, pipes and hollow prof., w/circular cross sect., nesoi
Stainless steel, seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section & extern. diam less than 19mm
Stainless steel, seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section & extern. diam of 19mm or more
Stainless steel, seamless, not cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section
Alloy steel (o/than stainless), seamless, cold-drawn/cold-rolled, tubes, pipes, etc., w/circ. cross sect., for mfr of ball/roller bearings
Alloy steel (o/than stainless), seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section, nesoi
Alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc. w/circ. cross sect., for mfr ball/roller bearings
Alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc. w/circ. cross sect., for boilers, heaters, etc
Heat-resisting alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc., w/circ. cross sect., nesoi
Alloy steel (o/than heat-resist or stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes and hollow prof., w/circ. cross sect., nesoi
Iron (o/than cast) or nonalloy steel, seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness of 4 mm or more
Alloy steel (o/than stainless), seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness of 4 mm or more
Iron (o/than cast) or nonalloy steel, seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness less than 4 mm
Alloy steel (o/than stainless), seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness less than 4 mm
Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, long. submerg. arc weld., used for oil/gas
Alloy steel, seamed, circ. w/cross sect. & ext. diam o/406.4mm, line pipe, long. submerg. arc weld., used for oil/gas pipelines
Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, long. welded nesoi, used for oil/gas
Alloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, long. welded nesoi, used for oil/gas pipelines
Iron or nonalloy steel, seamed, w/circ. cross sect.& ext. diam o/406.4mm, line pipe, not long. welded, used for oil/gas
Alloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, not long. welded, used for oil/gas pipelines
Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, threaded/coupled, of kind for drilling for oil/gas
Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, n/threaded/coupled, of kind for drill. for oil/gas
Alloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, threaded/coupled, of kind for drilling for oil/gas
Alloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, n/threaded/coupled, of kind for drilling for oil/gas
Steel, long. welded, w/circ. cross sect & ext. diam o/406.4mm, tapered pipes and tubes principally used as pts of illuminating arts.
Iron or nonalloy steel, long. welded, w/circ. cross sect. & ext. diam. o/406.4mm, tubes and pipes, o/th used in oil/gas drill.etc
Alloy steel, long. welded, w/circ. cross sect. & ext. diam. o/406.4mm, tubes and pipes, o/than used in oil/gas drill. or pipelines
Iron or nonalloy steel, weld. o/than long. weld., w/circ. x-sect. & ext. diam. o/406.4mm, tubes and pipes, o/th used in oil/gas drill.etc
Alloy steel, weld. o/than long. weld., w/circ. x-sect. & ext. diam. o/406.4mm, tubes and pipes, o/than used in oil/gas drill. or pipelines
Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, not welded, tubes and pipes, o/th used in oil/gas drill.etc
Alloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, not welded, tubes and pipes, o/than used in oil/gas drill. or pipelines
Welded stainless steel, w/ext. diam 406.4mm or less or o/than circ. x-sect, line pipe of a kind used for oil and gas pipelines
Iron or nonalloy steel, seamed, w/ext. diam. 406.4mm or less or o/than circ. x-sect, line pipe of a kind used for oil and gas pipelines
Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, line pipe of a kind used for oil an
Welded stainless steel, w/ext. diam 406.4mm or less or o/than circ. x-sect, threaded/coupled, casing of kind used in drilling for oil/gas
Welded stainless steel, w/ext. diam 406.4mm or less or o/than circ. x-sect, n/threaded/coupled, casing of kind used in drilling for oil/gas
Welded stainless steel, w/ext. diam 406.4mm or less or o/than circ. x-sect, tubing of a kind used for drilling for oil/gas
Iron or nonalloy steel, seamed, w/ext. diam 406.4mm or less or o/than circ. x-sect, threaded/coupled, casing of kind used in drill. oil/gas
Iron or nonalloy steel, seamed, w/ext. diam 406.4mm or less or o/than circ. x-sect, n/threaded/coupled, casing kind used drill for oil/gas
Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, threaded/coupled, casing of kind us
Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, n/threaded/coupled, casing of kind
Iron or nonalloy steel, seamed, w/ext. diam. 406.4mm or less or o/than circ. x-sect, tubing of a kind used for drilling for oil/gas
Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, tubing of a kind used for drilling
Iron or nonalloy steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow profiles, w/wall thick. less than 1.65 mm
Nonalloy steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tapered pipes & tubes, w/wall thick. of 1.65 mm+, pts. of illum. arts.
Iron or nonalloy steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, pipes, tubes & holl. prof., w/wall thick. of 1.65 mm or more
Stainless steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow profiles, w/wall thick. less than 1.65 mm
Stainless steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow profiles, w/wall thick. of 1.65 mm or more
Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow prof., w/wall thick. less th/1.65 mm
Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tapered pipes & tubes, w/wall thick. of 1.65 mm+, pts. illum
Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow prof., w/wall thick. of 1.65 mm+
Iron or nonalloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more
Alloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more
Iron or nonalloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm
Base metal forks (o/than plated w/prec. metal, or w/handles of stain. steel, wood, rubber or plastics), nesoi
Base metal spoons, w/stainless steel handles & valued under 25 cents each
Base metal spoons, w/stainless steel handles & valued at 25 cents and over, and base metal ladles w/stainless steel handles
Base metal spoons and ladles with handles of base metal (o/than stain. steel) or w/nonmetal handles
Iron or steel, aluminum, or zinc hinges and base metal parts thereof, designed for motor vehicles
Iron or steel, aluminum, or zinc hinges and base metal parts thereof, not designed for motor vehicles
Base metal (o/than iron/steel/aluminum/zinc) hinges and base metal parts thereof
Iron or steel, aluminum or zinc mountings, fittings and similar articles nesoi, suitable for motor vehicles, and base metal parts thereof
Base metal (o/than iron/steel/aluminum/zinc) mountings, fittings & similar articles, suitable for motor vehicles, & base metal pts thereof
Iron or steel, aluminum or zinc mountings, fittings & similar articles, nesoi, suitable for buildings, & base metal pts thereof
Base metal (o/than iron/steel/aluminum/zinc) mountings, fittings and similar arts, nesoi, suitable for buildings & base metal parts thereof
Iron or steel, aluminum, or zinc mountings, fittings & similar articles, suitable for furniture, and base metal parts thereof
Base metal (o/than iron/steel/aluminum/zinc) mountings, fittings & similar articles, suitable for furniture, and base metal parts thereof
Iron or steel, aluminum, or zinc, mountings, fittings & similar articles nesoi, and base metal parts thereof
Base metal (o/than iron/steel/aluminum/zinc) mountings, fittings & similar articles nesoi, and base metal parts thereof
Iron or steel flexible tubing, with fittings
Iron or steel flexible tubing, without fittings
Base metal (o/than iron or steel) flexible tubing, with fittings
Base metal (o/than iron or steel) flexible tubing, without fittings
Iron or steel bifurcated rivets, not brightened, not lathed and not machined
Base metal tubular or bifurcated rivets (o/than of iron or steel)
Alloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm
Iron or nonalloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more
Alloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more
Iron or nonalloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm
Alloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm
Iron or nonalloy steel, seamed o/welded, w/non-circ. x-sect. or circ. x-sect. w/ext. diam. 406.4mm or less, tubes, pipes & hollow profiles
Alloy steel, seamed o/than welded, w/non-circ. x-sect or circ. x-sect w/ext. diam. 406.4mm or less, tubes, pipes and hollow profiles
Cast ductile iron or steel, fittings for tubes or pipes
Cast iron or steel, fittings for tubes or pipes, nesoi
Stainless steel, flanges for tubes/pipes, forged, not machined, not tooled and not otherwise processed after forging
Stainless steel, not cast, flanges for tubes/pipes, not forged or forged and machined, tooled and otherwise processed after forging
Stainless steel, not cast, threaded sleeves (couplings) for tubes/pipes
Stainless steel, not cast, threaded elbow and bends for tubes/pipes
Stainless steel, not cast, butt welding fittings for tubes/pipes
Stainless steel, not cast, fittings for tubes/pipes, nesoi
Iron or nonalloy steel, flanges for tubes/pipes, forged, not machined, not tooled and not otherwise processed after forging
Alloy steel (o/than stainless), not cast, flanges for tubes/pipes, forged, not machined/tooled and not otherwise processed after forging
Iron or steel (o/than stainless), not cast, flanges for tubes/pipes, not forged or forged and machined, tooled & processed after forging
Iron or steel (o/than stainless), not cast, threaded sleeves (couplings) for tubes/pipes
Iron or steel (o/than stainless), not cast, threaded elbow and bends for tubes/pipes
Iron or nonalloy steel, not cast, butt welding fittings for tubes/pipes, w/inside diam. less than 360mm
Alloy steel (o/than stainless), not cast, butt welding fittings for tubes/pipes, w/inside diam. less than 360mm
Iron or alloy steel (o/than stainless), not cast, butt welding fittings for tubes/pipes, w/inside diam. 360mm or more
Iron or nonalloy steel, fittings for tubes/pipes, nesoi, forged, not machined, not tooled and not otherwise processed after forging
Alloy steel (o/than stainless), fittings for tubes/pipes, nesoi, forged, not machined/tooled and not otherwise processed after forging
Iron or steel, helical springs, suitable for motor-vehicle suspension
Iron or steel, helical springs (o/than suitable for motor-vehicle suspension)
Iron or steel, hairsprings
Iron/steel (o/than stainless), n/cast, fittings for tubes/pipes, nesoi, not forged or forged and machined, tooled & processed after forging
Iron or steel, bridges and bridge sections
Iron or steel, towers and lattice masts
Stainless steel, doors, windows and their frames, and thresholds for doors
Iron or steel (o/than stainless), doors, windows and their frames, and thresholds for doors
Iron or steel, props and similar equipment for scaffolding, shuttering or pit-propping
Iron or steel, not in part alloy steel, columns, pillars, posts, beams and girders
Iron or steel, columns, pillars, posts, beams and girders, nesoi
Steel, grating for structures or parts of structures
Iron or steel, structures (excluding prefab structures of 9406) and parts of structures, nesoi
Iron/steel, reservoirs, tanks, vats, siml. contain., for any material (o/than compress./liq.gas), w/capacity o/300 l, n/fit. w/mech/thermal
Iron/steel, tanks, casks, drums, cans, boxes & siml. cont. for any material (o/than compress./liq.gas), w/cap. of 50+ l but n/o 300 l
Iron/steel, cans for any material (o/compressed/liq. gas), closed by soldering or crimping, w/cap. less than 50 l
Iron/steel, cans for any material (o/compressed/liq. gas), n/closed by soldering or crimping, w/cap. less than 50 l
Iron/steel, containers for compressed or liquefied gas
Stainless steel, stranded wire, not elect. insulated, fitted with fittings or made up into articles
Stainless steel, stranded wire, not elect. insulated, not fitted with fittings or made up into articles
Iron or steel (o/than stainless), stranded wire, not elect. insul., fitted with fittings or made up into articles
Iron or steel (o/than stainless), stranded wire, not elect. insul., not fitted with fittings or made up into articles
Stainless steel, ropes, cables and cordage (o/than stranded wire), not elect. insul., fitted with fittings or made up into articles
Stainless steel, ropes, cables and cordage (o/than stranded wire), not elect. insul., not fitted with fittings or made up into articles
Iron/steel (o/stainless), ropes, cables & cordage (o/than stranded wire), n/elect. insul., fitted with fittings or made up into articles
Iron/steel (o/stainless), ropes, cables & cordage, of brass plated wire (o/than stranded wire), n/elect. insul., w/o fittings or arts.
Iron/steel (o/stainless), ropes, cables & cordage, o/th of brass plate wire (o/than stranded wire), n/elect. insul., w/o fittings etc.
Iron/steel (o/stainless), plaited bands, slings and the like, not electrically insulated
Iron/steel, barbed wire; iron/steel, twisted hoop or single flat wire and loosely twisted double wire, of a kind used for fencing
Stainless steel, woven cloth endless bands for machinery, w/meshes not finer than 12 wires to the lineal cm in warp or filling
Stainless steel, woven cloth endless bands for machinery, w/meshes finer than 12 but n/finer than 36 wires to the lineal cm warp or filling
Stainless steel, Fourdrinier wires for papermaking machines w/94 or more wires to the lineal cm in warp or filling
Stainless steel, Fourdrinier wires for papermaking machines w/36 to 93 wires to the lineal cm in warp or filling
Stainless steel, woven cloth endless bands for machinery, nesoi, w/meshes finer than 36 wires to the lineal cm in warp or filling
Stainless steel, woven cloth (o/than endless bands for machinery), w/meshes not finer than 12 wires to the lineal cm in warp or filling
Stainless steel, woven cloth (o/than endless bands for machinery), w/meshes finer 12 but n/finer 36 wires to the lineal cm warp/filling
Stainless steel, Fourdrinier wires (o/than endless bands) for papermaking machines,w/meshes 94 or more wire to lineal cm warp/filling
Stainless steel, Fourdrinier wires (o/than endless bands) for papermaking machines, w/meshes 36 to 93 wires to the lineal cm warp/filling
Stainless steel woven cloth (other than endless band for machinery), neosi, w/meshes finer than 36 wires to the lineal cm in warp or filling
Iron or steel (o/than stainless), woven cloth
Iron/steel, grill, netting & fencing, of wire w/maximum x-sect. dimension 3 mm or more, welded at intersection, w/mesh size 100 cm2 or more
Iron/steel, fencing, of wire, welded at the intersection, plated or coated with zinc, whether or not covered w/plastic material
Iron/steel, grill and netting, of wire, welded at the intersection, plated or coated with zinc, nesoi
Iron/steel, grill, netting and fencing, of wire, welded at the intersection, not plated or coated with zinc
Iron/steel, grill, netting and fencing, of wire, not welded at the intersection, plated or coated with zinc
Iron/steel, grill, netting and fencing, of wire, not welded at the intersection, coated with plastics
Iron/steel, grill, netting and fencing, of wire, not welded at the intersection, not cut to shape
Iron/steel, grill, netting and fencing, of wire, not welded at the intersection, cut to shape
Iron or steel, expanded metal
Iron or steel, roller chain
Iron or steel, articulated link chain (other than roller chain)
Iron or steel, parts of articulated link chain
Iron or steel, skid chain, not over 8 mm in diameter
Iron or steel, skid chain, over 8 mm in diameter
Iron or steel, stud link chain
Alloy steel, welded link chain, not over 10 mm in diameter
Alloy steel, welded link chain, over 10 mm in diameter
Iron or nonalloy steel, welded link chain, not over 10 mm in diameter
Iron or nonalloy steel, welded link chain, over 10 mm in diameter
Iron or steel, chain nesoi, with links of essentially round cross section, not over 8 mm in diameter
Iron or steel, chain nesoi, with links of essentially round cross sections, over 8 mm in diameter
Iron or steel, chain nesoi
Iron or steel, parts of chain (other than articulated link chain)
Iron or steel, anchors, grapnels and parts thereof
Iron or steel, thumb tacks
Iron or steel, nails, tacks, corrugated nails, staples & similar arts., not threaded, suitable for use in powder-actuated hand tools
Iron or steel, nails, tacks, corrugated nails, staples & similar arts., threaded, suitable for use in powder-actuated hand tools
Iron or steel, nails, tacks, corrugated nails, staples & similar arts., of one piece construction, made of round wire, nesoi
Iron or steel, nails, tacks, corrugated nails, staples & similar arts., of one piece construction, not made of round wire, nesoi
Iron or steel, nails, tacks, corrugated nails, staples & similar arts., of two or more pieces, nesoi
Iron or steel, coach screws
Iron or steel, wood screws (o/than coach screws)
Iron or steel, screw hooks and screw rings
Iron or steel, self-tapping screws, w/shanks or threads less than 6 mm in diameter
Iron or steel, self-tapping screws, w/shanks or threads 6 mm or more in diameter
Iron or steel, bolts and bolts & their nuts or washers, imported in the same shipment
Iron or steel, machine screws (o/than cap screws), 9.5 mm or more in length and 3.2 mm in diameter
Iron or steel, threaded studs
Iron or steel, screws and bolts, nesoi, having shanks or threads less than 6 mm in diameter
Iron or steel, screws and bolts, nesoi, having shanks or threads 6 mm or more in diameter
Iron or steel, nuts
Iron or steel, threaded articles similar to screws, bolts, nuts, coach screws & screw hooks, nesoi
Check valves of iron or steel for pipes, boiler shells, tanks, vats or the like
Check valves other than of copper or iron or steel, for pipes, boiler shells, tanks, vats or the like
Taps, cocks, valves & similar appliances for pipes, boiler shells, tanks, vats or the like, hand operated, of iron or steel, nesi
Taps, cocks, valves & similar appliances for pipes, boiler shells, tanks, vats or the like, hand operated, not copper, iron or steel, nesi
Parts of hand operated and check appliances for pipes, boiler shells, tanks, vats or the like, of iron or steel
Parts of hand operated and check appliances for pipes, boiler shells, tanks, vats or the like, other than of copper or iron or steel
Pts. & access. for bicycles, sets of steel tubing cut to exact length for the assembly (w/other pts) into the frame & fork of one bicycle
Housings and steel bases for electric flat irons of subheading 8516.40
Machine tools for work wire of iron/steel used in production of certain radial tires, (in 4011) or parts (in 8463.30/846
Cast stainless steel single-piece exhaust gas manifolds (in subheading 9902.01.50)--problem reference
We use cookies and 3rd party services to recognize visitors, target ads and analyze site traffic.
By using this site you agree to this Privacy Policy. Learn how to clear cookies here