Harmonized tariff code
HS Code 44111360: Fiberboard Of A Density Over 0.5 G/cm3 But Not Over 0.8 G/cm3, Not
HS code 44111360 covers Fiberboard of a density over 0.5 g/cm3 but not over 0.8 g/cm3, not mechanically worked surface covered(except for oil treatment). The quantity unit is cubic meters (M3). The MFN duty rate is Free. Tariff rates and program eligibility can change, so verify the current official tariff schedule before shipment.
Product Information
HS code 441113100 refers to plywood sheets made from non-coniferous wood. These sheets are commonly used in construction, furniture making, and other woodworking projects.
Code hierarchy
Chapter 44 - Wood and articles of wood Heading 4411 Subheading 441113
Bound means the listed rate is committed under trade rules. Tariff rates and program eligibility can change, so verify the current official tariff schedule before shipment.
Trade States
Importing US states
Exporting US states
Description in Multiple Languages
- لوحات من كثافة أكثر من 0.5 غ / CM3 ولكن ليس على 0.8 غ / CM3، لتغطية لم يعمل ميكانيكيا السطحية (باستثناء معالجة النفط)
- Faserplatten mit einer Dichte über 0,5 g / cm 3, aber nicht mehr als 0,8 g / cm3, nicht mechanisch bearbeiteten Oberfläche abgedeckt (mit Ausnahme der Ölbehandlung)
- Fibra de madera de una densidad superior a 0,5 g / cm3, pero no más de 0,8 g / cm3, no superficie mecánicamente trabajado cubierto (excepto para el tratamiento de aceite)
- Panneaux de fibres d`une masse volumique supérieure à 0,5 g / cm3 mais ne dépassant pas 0,8 g / cm3, surface non travaillée mécaniquement recouverte (sauf pour le traitement de l`huile)
- 0.5 से अधिक घनत्व के फाइबरबोर्ड g / cm3 लेकिन नहीं से अधिक 0.8 ग्राम / सेमी 3, नहीं यंत्रवत् काम सतह कवर (तेल उपचार के लिए छोड़कर)
- 0.5を超える密度の繊維板グラム/ cm 3でなくオーバー0.8グラム/ cm 3ではなく、機械加工面を覆う（油処理を除きます）
- 0.5 이상의 밀도 섬유판 g / cm3 아닌 이상 0.8 g / cm3 아니라 기계적 가공면이 커버 (오일 처리 제외)
- Painéis de fibras de uma densidade superior a 0,5 g / cm3, mas não mais de 0,8 g / cm3, não trabalhados mecanicamente superfície coberta (com excepção para o tratamento de petróleo)
- ДВП, плотность более 0,5 г / см3, но не более чем 0,8 г / см3, а не механической обработке поверхность покрыта (для обработки масла, за исключением)
- 一密度的纤维板超过0.5克/厘米3但不大于0.8克/厘米3，而不是机械加工表面覆盖（除了油处理）
Similar HS Codes
44111220-fiberboard-of-a-density-over-0-5-but-not-over-0-8
44111230-fiberboard-of-a-density-over-0-5-but-not-over-0-8
44111260-fiberboard-of-a-density-over-0-5-g cm3-but-not
44111290-fiberboard-nesoi-density-between-0-5-g cm3-and
44111310-fiberboard-of-a-density-over-0-5-but-not-over-0-8
44111320-fiberboard-of-a-density-over-0-5-but-not-over-0-8
44111330-fiberboard-of-a-density-over-0-5-but-not-over-0-8
44111360-fiberboard-of-a-density-over-0-5-g cm3-but-not
44111390-fiberboard-nesoi-density-between-0-5-g cm3-and
44111410-fiberboard-of-a-thickness-exceeding-9-mm-not
44111420-fiberboard-of-a-thickness-exceeding-9-mm
44111430-fiberboard-of-a-thickness-exceeding-9-mm
44111460-fiberboard-of-a-thickness-exceeding-9-mm-not
44111490-fiberboard-nesoi-of-a-thickness-exceeding-9
Fiberboard density mechanically worked surface covered except treatment More on HS code 44111360
HS Code 44111360 FAQ
What is HS code 44111360?
HS code 44111360 is used for Fiberboard of a density over 0.5 g/cm3 but not over 0.8 g/cm3, not mechanically worked surface covered(except for oil treatment).
What quantity unit is used for HS code 44111360?
The quantity unit listed for HS code 44111360 is cubic meters (M3).
What is the MFN duty rate for HS code 44111360?
The MFN duty rate shown for HS code 44111360 is Free. Tariff rates can change, so verify the current official tariff schedule before shipment.