Search

Harmonized System Codes • Schedule B • Harmonized Commodity Description

Searched for: stainless steel bollards

Stainless steel, table, kitchen or o/household arts. amd parts thereof
Iron (o/than cast) or steel (o/than stainless), table, kitchen or o/household arts. and parts thereof, enameled
Iron (o/th cast) or steel (o/th stainless), table, kitchen or o/household arts. & parts thereof, not enameled but plated/coat. w/silver
Iron (o/th cast)/steel (o/th stainless), table/kitchen /household arts. & parts thereof, not enameled but plated/coat. w/prec metal o/silver
Iron (o/th cast) or steel (o/than tinplate or stainless), cookingware, not coated or plated with precious metal
Iron (o/th cast)/steel (o/th tinplate or stainless), table, kitchen (o/th cooking.) or o/household arts & part, n/coated/plated w/prec.metal
Stainless steel, sinks and wash basins
Iron or steel, sanitary ware (o/than baths or stainless steel sinks and wash basins) and parts thereof
Stainless steel, width 300m+ but less th/600mm, hot-rolled flat-rolled products, w/thickness of less than 4.75 mm
Stainless steel, width less th/300mm, hot-rolled flat-rolled products, w/thickness of less than 4.75 mm
Stainless steel, width 300+ but less th/600mm, cold-rolled flat-rolled products
Stainless steel, width less th/300mm, cold-rolled flat-rolled products, w/thickness o/1.25 mm
Stainless steel, width less th/300mm, cold-rolled flat-rolled products, w/ thickness of 0.25 mm but n/o 1.25 mm
Stainless steel waste and scrap
Alloy steel (o/than stainless) waste and scrap
Stainless steel, ingots and other primary forms
Stainless steel, semifinished products of rectangular (other than square) cross-section
Stainless steel, semifinished products, other than of rectangular (other than square) cross-section
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thickness o/10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. 4.75 mm or more but n/o 10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick. 3 mm or more but less than 4.75 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thickness less than 3 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thickness o/10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thick. 4.75 mm or more but n/o 10 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thick. 3 mm or more but less than 4.75 mm
Stainless steel, width 600mm+, hot-rolled flat-rolled products, not in coils, w/thickness less than 3 mm
Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of 4.75 mm or more
Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of 3 mm or more but less than 4.75 mm
Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness o/1 mm but less than 3 mm
Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of 0.5 mm or more but n/o 1 mm
Stainless steel, width 600mm+, cold-rolled flat-rolled products, w/thickness of less than 0.5 mm
Stainless steel, width 600mm+, flat-rolled products, nesoi, further worked than cold-rolled
Stainless steel, width less th/600mm, hot-rolled flat-rolled products, w/thickness of 4.75 mm or more
Stainless razor blade steel, width less th/300mm, cold-rolled flat-rolled, w/thickness n/o 0.25 mm
Stainless steel (o/than razor blade steel), width less th/300mm, cold-rolled flat-rolled products, w/thickness n/o 0.25 mm
Stainless steel, width less th/600mm, flat-rolled products further worked than cold-rolled
Stainless steel, bars and rods in irregularly wound coils, hot-rolled
Stainless steel, bars and rods, hot-rolled, hot-drawn or extruded, of circular cross-section
Stainless steel, bars and rods, hot-rolled, hot-drawn or extruded, other than of circular cross-section
Stainless steel, bars and rods, not further worked than cold-formed or cold-finished, nesoi
Stainless steel, bars and rods, further worked than cold-formed or cold-finished, nesoi
Stainless steel, angles, shapes & sections, hot-rolled, not drilled/punched or otherwise advanced
Stainless steel, angles, shapes & sections, other than hot-rolled and not drilled/punched or otherwise advanced
Stainless steel, round wire
Stainless steel, flat wire
Stainless steel, wire (other than round or flat wire)
Alloy (o/than stainless) steel, ingots and other primary forms
Alloy (o/than stainless) steel, semifinished products
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm+
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., in coils, w/thick less 4.75mm
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled products, n/coils, w/thick 4.75mm+
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat-rolled prod., n/coils, w/thick less 4.75mm
Table knives w/fixed blades, w/handles other than of silver-plate, stainless steel, rubber or plastics
Base metal forks, w/stainless steel handles cont. Ni or o/10% by wt of Mn, w/overall length n/o 25.9cm, valued under 25cents ea
Base metal forks, w/stainless steel handles cont. Ni or o/10% by wt of Mn, nesoi
Base metal forks, w/stainless steel handles, nesoi, valued under 25 cents each
Base metal forks, w/stainless steel handles, nesoi, valued at 25 cents each or more
Stainless steel, seamless line pipe used for oil or gas pipelines
Alloy (other than stainless) steel, seamless line pipe used for oil or gas pipelines
Stainless steel, seamless drill pipe, of a kind used in drilling for oil or gas
Alloy (other than stainless) steel, seamless drill pipe, of a kind used in drilling for oil or gas
Stainless steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas
Stainless steel, seamless casing pipe, not threaded or coupled, of a kind used in drilling for oil or gas
Stainless steel, seamless tubing, of a kind used in drilling for oil or gas
Alloy (other than stainless) steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas
Alloy (other than stainless) steel, seamless casing pipe, not threaded or coupled, of a kind used in drilling for oil or gas
Alloy (other than stainless) steel, seamless tubing, of a kind used in drilling for oil or gas
Stainless steel, seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section & extern. diam less than 19mm
Stainless steel, seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section & extern. diam of 19mm or more
Stainless steel, seamless, not cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section
Alloy steel (o/than stainless), seamless, cold-drawn/cold-rolled, tubes, pipes, etc., w/circ. cross sect., for mfr of ball/roller bearings
Alloy steel (o/than stainless), seamless, cold-drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section, nesoi
Alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc. w/circ. cross sect., for mfr ball/roller bearings
Alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc. w/circ. cross sect., for boilers, heaters, etc
Heat-resisting alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc., w/circ. cross sect., nesoi
Alloy steel (o/than heat-resist or stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes and hollow prof., w/circ. cross sect., nesoi
Alloy steel (o/than stainless), seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness of 4 mm or more
Alloy steel (o/than stainless), seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness less than 4 mm
Welded stainless steel, w/ext. diam 406.4mm or less or o/than circ. x-sect, line pipe of a kind used for oil and gas pipelines
Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, line pipe of a kind used for oil an
Welded stainless steel, w/ext. diam 406.4mm or less or o/than circ. x-sect, threaded/coupled, casing of kind used in drilling for oil/gas
Welded stainless steel, w/ext. diam 406.4mm or less or o/than circ. x-sect, n/threaded/coupled, casing of kind used in drilling for oil/gas
Welded stainless steel, w/ext. diam 406.4mm or less or o/than circ. x-sect, tubing of a kind used for drilling for oil/gas
Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, threaded/coupled, casing of kind us
Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, n/threaded/coupled, casing of kind
Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, tubing of a kind used for drilling
Stainless steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow profiles, w/wall thick. less than 1.65 mm
Stainless steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow profiles, w/wall thick. of 1.65 mm or more
Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow prof., w/wall thick. less th/1.65 mm
Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tapered pipes & tubes, w/wall thick. of 1.65 mm+, pts. illum
Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow prof., w/wall thick. of 1.65 mm+
Base metal spoons, w/stainless steel handles & valued under 25 cents each
Base metal spoons, w/stainless steel handles & valued at 25 cents and over, and base metal ladles w/stainless steel handles
Stainless steel, flanges for tubes/pipes, forged, not machined, not tooled and not otherwise processed after forging
Stainless steel, not cast, flanges for tubes/pipes, not forged or forged and machined, tooled and otherwise processed after forging
Stainless steel, not cast, threaded sleeves (couplings) for tubes/pipes
Stainless steel, not cast, threaded elbow and bends for tubes/pipes
Stainless steel, not cast, butt welding fittings for tubes/pipes
Stainless steel, not cast, fittings for tubes/pipes, nesoi
Alloy steel (o/than stainless), not cast, flanges for tubes/pipes, forged, not machined/tooled and not otherwise processed after forging
Iron or steel (o/than stainless), not cast, flanges for tubes/pipes, not forged or forged and machined, tooled & processed after forging
Iron or steel (o/than stainless), not cast, threaded sleeves (couplings) for tubes/pipes
Iron or steel (o/than stainless), not cast, threaded elbow and bends for tubes/pipes
Alloy steel (o/than stainless), not cast, butt welding fittings for tubes/pipes, w/inside diam. less than 360mm
Iron or alloy steel (o/than stainless), not cast, butt welding fittings for tubes/pipes, w/inside diam. 360mm or more
Alloy steel (o/than stainless), fittings for tubes/pipes, nesoi, forged, not machined/tooled and not otherwise processed after forging
Iron/steel (o/than stainless), n/cast, fittings for tubes/pipes, nesoi, not forged or forged and machined, tooled & processed after forging
Stainless steel, doors, windows and their frames, and thresholds for doors
Iron or steel (o/than stainless), doors, windows and their frames, and thresholds for doors
Stainless steel, stranded wire, not elect. insulated, fitted with fittings or made up into articles
Stainless steel, stranded wire, not elect. insulated, not fitted with fittings or made up into articles
Iron or steel (o/than stainless), stranded wire, not elect. insul., fitted with fittings or made up into articles
Iron or steel (o/than stainless), stranded wire, not elect. insul., not fitted with fittings or made up into articles
Stainless steel, ropes, cables and cordage (o/than stranded wire), not elect. insul., fitted with fittings or made up into articles
Stainless steel, ropes, cables and cordage (o/than stranded wire), not elect. insul., not fitted with fittings or made up into articles
Iron/steel (o/stainless), ropes, cables & cordage (o/than stranded wire), n/elect. insul., fitted with fittings or made up into articles
Iron/steel (o/stainless), ropes, cables & cordage, of brass plated wire (o/than stranded wire), n/elect. insul., w/o fittings or arts.
Iron/steel (o/stainless), ropes, cables & cordage, o/th of brass plate wire (o/than stranded wire), n/elect. insul., w/o fittings etc.
Iron/steel (o/stainless), plaited bands, slings and the like, not electrically insulated
Stainless steel, woven cloth endless bands for machinery, w/meshes not finer than 12 wires to the lineal cm in warp or filling
Stainless steel, woven cloth endless bands for machinery, w/meshes finer than 12 but n/finer than 36 wires to the lineal cm warp or filling
Stainless steel, Fourdrinier wires for papermaking machines w/94 or more wires to the lineal cm in warp or filling
Stainless steel, Fourdrinier wires for papermaking machines w/36 to 93 wires to the lineal cm in warp or filling
Stainless steel, woven cloth endless bands for machinery, nesoi, w/meshes finer than 36 wires to the lineal cm in warp or filling
Stainless steel, woven cloth (o/than endless bands for machinery), w/meshes not finer than 12 wires to the lineal cm in warp or filling
Stainless steel, woven cloth (o/than endless bands for machinery), w/meshes finer 12 but n/finer 36 wires to the lineal cm warp/filling
Stainless steel, Fourdrinier wires (o/than endless bands) for papermaking machines,w/meshes 94 or more wire to lineal cm warp/filling
Stainless steel, Fourdrinier wires (o/than endless bands) for papermaking machines, w/meshes 36 to 93 wires to the lineal cm warp/filling
Stainless steel woven cloth (other than endless band for machinery), neosi, w/meshes finer than 36 wires to the lineal cm in warp or filling
Iron or steel (o/than stainless), woven cloth
Cast stainless steel single-piece exhaust gas manifolds (in subheading 9902.01.50)--problem reference